NEWS

Spray Drying Technology：Spray drying technology is a method where liquid raw materials are dispersed into mist droplets within a drying chamber, and these droplets are dried using hot air to obtain the final product. The formation of droplets can be achieved by a rotary atomizer or a nozzle atomizer. The drying of the droplets can be accomplished by adjusting the temperature of the drying medium (typically air) or controlling the flow rate of the medium. The raw material can be in the form of a solution, emulsion, suspension, melt, or paste. The dried product can be made into powder, granule, hollow ball, or agglomerate form as per requirements.

Each set of spray dryer consists of several key components: a feed pump, an atomizer, an air heater, an air disperser, a drying chamber, a powder recovery system, and an exhaust air cleaning system.

Spray Drying Technology：Spray drying technology is a method where liquid raw materials are dispersed into mist droplets within a drying chamber, and these droplets are dried using hot air to obtain the final product. The formation of droplets can be achieved by a rotary atomizer or a nozzle atomizer. The drying of the droplets can be accomplished by adjusting the temperature of the drying medium (typically air) or controlling the flow rate of the medium. The raw material can be in the form of a solution, emulsion, suspension, melt, or paste. The dried product can be made into powder, granule, hollow ball, or agglomerate form as per requirements.

Each set of spray dryer consists of several key components: a feed pump, an atomizer, an air heater, an air disperser, a drying chamber, a powder recovery system, and an exhaust air cleaning system.

Scope of Application
Drying of the following materials in the pharmaceutical, food, and chemical industries, etc.
Suitable for thick liquid, paste, and powdery materials.
Heat - sensitive materials requiring low - temperature drying.
Explosive, strongly stimulating, extremely poisonous, and easily oxidizable substances.
Materials from which organic solvents need to be recovered.

Features
The machine adopts the method of heating both internally and with mixing. The heat transfer area is large.
The machine stirs, making the material form a continuous circulation state, which further increases the uniformity of heat received by the material.
This machine is set up for drying slurry, paste, and paste - like materials.